FIRGLO Decorative

FIRGLO Decorative Coating


700 Full-Gloss Level 90% RAL****

701 Semi-Gloss Level 50% RAL****

703 Mat-Gloss Level 10% RAL****


A decorative protective coating, can be used as a single coat finish or two coat using Firglo 70 primer finish on bare ferrous or aluminium coated metal surfaces.


Colour: - Full colour range to RAL standard


Preparation: - All surfaces should be free of rust; scale and weld spatter, be suitably degreased and dried.


Application Method: - Electrostatic Spray or Conventional Spray (Plus 10% Thinners)


Dry Film Thickness: - 15 to 30µ (plus primer total 35 to 60µ)


Wet Film Thickness: - 45 to 90µ (plus primer total 95 to 165µ)


Heat Resistance: - Moderate


Drying Time: - Surface dry 20 mins. Hard dry 4 hours. Dry by stoving for 15 mins @ 65°C.


Salt Spray: - 96 hours to ASTM B117 (plus primer 500 hours)


Bend Test: - 6mm to BS3900 Part E1


Scratch Test: -1200grms to BS3900 Part E2


Cross Hatch: - Classification 0 to BS3900 Part E6


Chip Test: - Rating 3 to BS Au148 Part 15


Primer: - FIRGLO 70 Anti-corrosive chassis primer.